Lehel Répits Generalplan of The Great Pyramids
and The Great Sphinx on The Gizeh Plateau






A few images and quotes from his Vimaana I to start with.
Translated from Swedish by me.


Why three artificial mountains

Impact moment


If a cross-section of the Great Pyramid is studied, there is an allocation of the center of gravity towards the South. In combination with the slight slope of the base it prevented the pyramid from sliding away in the moment of impact.Part of the relative increment of the buildings mass served to keep it in place. But the excessive force had to be neutralized some way, otherwise it would have destroyed the building. This problem was solved by the delicately arranged system of chambers and passageways, partly by dividing the building into two sections (E-W) which distributed the forces in two halves of the building.

Before the collision the granite plugs now in the lower end of the ascending and descending passages was at their upper ends. In the same moment as the movement of Earths crust stopped, the granite plugs in the ascending passage started to move downwards. The air in the passage was compressed and when enough pressure was achieved the granite plugs in the descending passage started to accelerate towards the bottom of the building, thus creating an even higher air pressure. Delayed by the compression chamber, formed by the subterranean chambers, the air had only one way to expand, since the granite plugs now where stuck in the lower end of the descending passage. Trough the well shaft into the cave and further up the well shaft. With an explosive force the air blows its way trough the weakest part formed by the partly finished upper well shaft into the Great Gallery. Thus the interior of the Great Pyramid was exposed to a huge pressure, which by the shape and construction of the Gallery and the King´s and Queen´s chambers was directed out in all directions of the building. The construction of the roof above Kings chamber balanced the mass of the overlaying stone and constantly dislocated the dynamic center of gravity as the pendling of the crust diminished. Together with the elastic reaction of the compressed air it prevented the building from being crushed from its own enormous weight.

Then it was time for the next danger...the Great Flood. By careful studying of the direction of the wave a location was chosen to ensure that the pyramid would not be left under water. When the wave come in from SW it was divided by the small pyramid in two main directions, before it encountered the much larger second pyramid. Weakened by the reactive water jets formed by the small pyramid the huge artificial mountain could stay in place and further reduce the force of the streaming water and create large water whirls at the North and East side of the second pyramid. These huge whirls did the final job and concluded the purpose of the plateau objects.

To protect the Great Pyramid from destruction.
The flood


The Catastrophe






An introduction to the geometry



7 = 189/27


Table 1
1 / 7 = 0 1 4 2 8 5 7 =27
2 / 7 = 0 2 8 5 7 1 4 =27
3 / 7 = 0 4 2 8 5 7 1 =27
4 / 7 = 0 5 7 1 4 2 8 =27
5 / 7 = 0 7 1 4 2 8 5 =27
6 / 7 = 0 8 5 7 1 4 2 =27
7 / 7 = 1 0 0 0 0 0 0
27 27 27 27 27 27 =162
6/7 + 1/7 = 1 = 162 + 27 = 189

Table 2
1 / 7 = 0 1 4 2 8 5 7
3 / 7 = 0 4 2 8 5 7 1
2 / 7 = 0 2 8 5 7 1 4
6 / 7 = 0 8 5 7 1 4 2
4 / 7 = 0 5 7 1 4 2 8
5 / 7 = 0 7 1 4 2 8 5




Graphically one may visualize the dynamics of seven in the following manner: Since dividenderna in table 1 is arranged in order 1 - 2 - 3 - 4 - 5 - 6 then the decimals will alternate periodically . In table 2 the decimals have been placed in the order that the second row begins with 4 which is decimal number two in first decimal row. The third row begins with 2 and so on. If we now prints the divisions that equals the results, we receives the following order: 1 - 3 - 2 - 6 - 4 - 5. If one try to connect dividenderna with a curve that reaches them in the order 1 - 2 - 3 - 4 - 5 - 6, one can do this with 1 - 3 - 2. For 6 - 4 - 5 one has to commence with a new curve. On this manner one receives an image of two different patterns: one inward movement and a outward movement. I.e. a centripetal and a centrifugal movement. All movements in nature is, without exception, based on these movements. Natures third pattern is a results of a combination of the two first : namely the whirl.





Triangle 3-4-5

3-4-5



Triangle 3-5-7


Its relation to pi.


3-5-7



And its practical use.

3-5-7


Read more

 

The Generalplan

The Generalplan
The drawings


 

What's it all about

The vril power
It's the centripetal motion along with the centrifugal motion that is the energy producing motion in nature. On this combination the enormous power of, among others, tornados and maelstroems are based. These whirls is nothing other than miniatyr copies of a spiral galaxy, yes the entire motion of the universe. In the combined motion, the centripetal force is the gravity and the centrifugal is antigravity. All movements in todays engineering is based only on the centrifugal motion, i.e. on 1/3 of natures pattern of motion. Then it's not strangely that man merely achieves a 30% efficiency in our machines.



From here to there

The message

Spirals and phi Logarithmic spiral Vortex Motion Natural Movement Spira Solaris

This is a site by
Jerry Tönström
A few links about
The Gize Pyramids
www.digits.com